DAY 12 - (HOURS 1.00, TOTAL TIME 28.30HRS)
Here's a pic of the 12inch crack running down the grain:
- it should be behind the kerfing hopefully, so that will give it some strength when it's all together.
- the top of side two had warped a small bit, but I'll be cutting most of that bit off at the top, and the small bit of warping left will be glued to the neck block, so it's still a finished side to me!
- finished!
After spending waaaaaaaaay longer than I had planned on the sides (About a third of my time so far on the guitar) I finally packed up the bending iron, and stuck it back on the shelf.
Damn it felt good.
No comments:
Post a Comment